Lopke Rock Products
All material produced by Lopke Rock Products conforms to and meets all requirements as listed in the NYSDOT standard specification.


Fine Aggregate / Sands

▪ Concrete Sand (NYSDOT 703.07): NY and PA approved. 1/8” minus coarse, washed sand used to make concrete

▪ Sanding Sand: 3/16” minus washed sand used as an abrasive material for roads, sidewalks or driveways

▪ Mason Sand:
Extremely fine sand. Used to make mortar and as a bedding material under pool liners

▪ Mound Sand:
Approved in NY and PA for mound sand systems

▪ Filter Sand:
Very coarse, clean sand. Approved in NY and PA for filter sand systems

Soils

▪ Unscreened Topsoil: Natural topsoil before any stones or sticks are removed

▪ Screened Topsoil (NYSDOT 713.03):
Screened over a ½” slotted screen. Used for lawn and gardens

▪ Blended Topsoil:
50/50 blend of screened topsoil and compost (used for lawns only)

Coarse Aggregate / Stone Products

#1A Crushed Gravel (NYSDOT 703.02): Fine stone, primarily 1/8” to 5/16" in size. Often used in asphalt mixes. Also works well for a gravel walkway or very fine driveway topping

▪ #1ST's Crushed Gravel: 5/16" to ½"

▪ #1 Crushed (NYSDOT 703.02): Clean, crushed stone, 5/16" to 9/16" in size. Great for driveway topping and drainage applications

▪ #2 Crushed (NYSDOT 703.02): 9/16" to 1 1/8" size stone. Used for driveways, septic systems and drainage

▪ #3 Crushed: Washed gravel, primarily 1 1/8" to 2" in size

▪ Item #4 (NYSDOT 304.14): Bankrun gravel screened over a 2” screen. Used as a subbase for roads and driveways. *Will not compact as well as crusher run

▪ AASHTO #8: #1A & #1ST mix

▪ AASHTO #57: #1 & #2 mix

▪ Crusher Run (NYSDOT 304.12): Blasted sandstone from our quarry screened over a 1 ½” screen. Used as a subbase for roads and driveways.
*Easier and better to compact than Item 4

▪ Crusher Dust: 3/16 minus sandstone screening. Used under patio blocks and pavers

▪ Fine Stone Fill (NYSDOT 620.02):
Blasted sandstone 2” to 4”

▪ Light Stone Fill (NYSDOT 620.03):
Blasted sandstone 6” to 12”

▪ Medium Stone Fill (NYSDOT 620.04):
Blasted sandstone 12” to 24”

▪ Heavy Stone Fill (NYSDOT 620.05):
Blasted sandstone 24” to 36”

▪ Laid Rock (NYSDOT 620.06):
Blasted sandstone. Typically flat on 2 sides which makes it easier to stack.
Typical size length 5’, width 3’, thickness 2’. Sizes do vary


NEW YORK AND PENNSYLVANIA APPROVED SOURCES:

  • OWEGO-               (NYSDOT 6-11F,G) (PENNDOT LOPNYB14)
  • LOUNSBERRY-       (NYSDOT 6-13F,G) (PENNDOT LOPNYA14)
  • WHITNEY POINT-  (NYSDOT 9-46G1) (PENNDOT LOPNYC14)
  • BIRCHARDVILLE-   (NYSDOT 9-44R) (PENNDOT LOP57A14)


PLEASE SEE OUR PRICES PAGE FOR MORE INFORMATION ON PRODUCTS